LightBlog

lundi 31 août 2020

OnePlus CEO Pete Lau joins OPLUS as Senior VP, will oversee brand synergy between OnePlus, OPPO, Realme

OnePlus was co-founded by Pete Lau and Carl Pei back in 2013. Prior to this event, both Pete and Carl worked at OPPO as the Vice President and as the International Markets Manager respectively. As of now, both Pete and Carl hold key positions within OnePlus, as CEO of OnePlus and as Director of OnePlus Global respectively. However, a recent news report suggests that OnePlus CEO Pete Lau has taken on an additional role as Senior Vice President of OPLUS.

According to a report from Android Authority, Pete Lau has taken on additional responsibilities as the Senior VP and Chief Product Experience Officer. This new role involves duties around the brand synergy between the major OPLUS investment properties, namely OPPO, Realme, and OnePlus.

Pete Lau will retain the CEO tag with OnePlus, as per the statement offered by the company in the report:

Pete remains committed to his role as CEO of OnePlus. At the same time, he has also taken on the role of SVP and chief product experience officer for OPLUS, contributing to product and planning development.

If you’re wondering what OPLUS is, the report suggests that this is the investor company that oversees OnePlus, OPPO, and Realme. OPLUS’s mere existence is not really a mystery, as the holding company has different country-specific subsidiaries, such as OPLUS Mobitech India Pvt. Ltd. which counts OnePlus India’s General Manager Vikas Agarwal as its Director. You can look up OPLUS Mobitech on the Government of India’s Ministry of Corporate Affairs website to verify the same.

And now if you’re wondering what happened to BBK Electronics, the parent company that is widely presumed to oversee the three brands (OnePlus, OPPO, Realme) alongside Vivo, iQOO, and others — well that makes two of us that are a little confused. OnePlus has steadfastly denied associations with OPPO in the past, and now, Pete Lau denies that OPLUS is connected to BBK. As the original report notes, the background funding and corporate hierarchy of OnePlus and its sister brands remain shrouded in mystery.


Source: Android Authority

The post OnePlus CEO Pete Lau joins OPLUS as Senior VP, will oversee brand synergy between OnePlus, OPPO, Realme appeared first on xda-developers.



from xda-developers https://ift.tt/3bc6beG
via IFTTT

Walmart+ is the subscription alternative to Amazon Prime, will cost $98 per year

Walmart is insanely popular in the USA, proudly wearing the tag of being one of the biggest supermarket chains in the country. Now, Walmart is looking to take on Amazon Prime with its own subscription program, Walmart+, offering free deliveries and discounted gas to members who subscribe.

Walmart+ goes live for users in the USA on September 15, 2020. According to a report from The Washington Post, Walmart+ is the most direct attempt from the supermarket chain to compete against the popularity of Amazon’s Prime membership program. Walmart+ will reportedly cost $12.95 per month, or $98 if you opt for the annual subscription. In comparison, Amazon Prime costs $12.99 per month or $119 annually.

With Walmart+, members will receive unlimited free deliveries on orders from any of the retailer’s 4,700 stores across the USA, and up to 5 cents of discount per gallon of gasoline at Walmart, Murphy USA, and Murphy Express fuel stations. The membership also enables the “Scan & Go” feature in the company app, allowing customers to scan items as they shop and then check out using Walmart Pay.

Walmart will initially be offering around 160,000 items with free delivery eligibility, ranging across toys, electronics, and groceries. In comparison, Amazon Prime offered more than 10 million items for free one-day delivery, which explains why Prime boasts of 100 million subscribers. Amazon Prime also offers a bunch of other perks under its membership program, including Prime Video, Prime Music, and Prime Gaming. Walmart’s USP, on the other hand, is its wide network of stores, which could help the company scale up timely deliveries despite the COVID-19 disruptions. Walmart also has a better focus on groceries and essentials, two segments that have perennially received attention but have seen an increased influx during the pandemic. If the program does take off, we can expect to see more perks added along the way.


Source: The Washington Post

The post Walmart+ is the subscription alternative to Amazon Prime, will cost $98 per year appeared first on xda-developers.



from xda-developers https://ift.tt/34SucpU
via IFTTT

Google’s Android TV dongle could cost as low as $49 in the U.S.

In June, we brought you an exclusive first look at what could be Google’s upcoming Android TV dongle. We shared images that showed off the possible design, the dedicated remote, and the revamped Android TV user interface. However, what we were unable to reveal were the pricing and launch date. Fortunately, a new retail leak for the dongle, code-named “Sabrina,” may have just revealed its pricing in the U.S.

9to5Google is reporting that the “Sabrina” dongle has appeared in Home Depot’s internal system at a price of $49, making it one of the more affordable media streaming devices on the market. Earlier reports suggested the dongle would be “around or below $80,” so today’s report places the price much lower than anticipated.

As we previously reported, the “Sabrina” Android TV dongle will reportedly launch with Android TV on board and come with a dedicated remote that will offer a programmable button. Meanwhile, the debut of “Sabrina” is expected to concur alongside a revamped Android TV UI that’s more focused on content.

Google Android TV dongle remote

Possible remote

“Sabrina” may also feature integration with Nest doorbells and video cameras, making it easy for users to see alerts right from their TV. Additionally, we previously reported “Sabrina” would usher in a new Google Assistant response UI as well as YouTube TV integration into the “Live” tab.

9to5Google notes that the internal system at Home Depot lists “Sabrina” as coming in three colors: “Rock Candy”, “Como Blue”, and “Summer Melon”.

Google is expected to hold its next Made by Google event at the end of September or early October, where the company might unveil this mystery Android TV dongle alongside the Pixel 4A 5G, Pixel 5, and a new Nest speaker.

With so many details coming out over the past few months, it doesn’t seem like “Sabrina” will be a mystery for much longer.

The post Google’s Android TV dongle could cost as low as $49 in the U.S. appeared first on xda-developers.



from xda-developers https://ift.tt/3hGk7Qt
via IFTTT

OnePlus Buds are now available in Gray in the U.S.

When the OnePlus Buds launched in the U.S., they were only available in a glossy white color. Now, OnePlus has opened up sales for a version in gray, giving consumers a sleek, stealthy option for the back to school season.

The OnePlus Buds in gray come with a case to match and also feature a red accent around the chrome touchpad, a nice attention to detail. Whereas the OnePlus Buds in white look a little too much like Apple’s AirPods, the version in gray is uniquely its own. The beautiful Nord Blue color option is not available in the U.S., though.

We reviewed the OnePlus Buds last month, praising their sound, design, and affordable price. The earbuds also feature support for Google’s latest Fast Pair features, which makes pairing the OnePlus Buds quick and easy with an Android device.

If you decide to pick up the OnePlus Buds in gray, you won’t have to pay a premium; the wireless earbuds are available for just $79. The OnePlus Buds are thus more affordable than the more premium wireless earbuds on the market, including the Samsung Galaxy Buds Live and Apple AirPods Pro, but they lack some features like Active Noise Cancellation and wireless charging. The app also only supports OnePlus phones, so you won’t be able to update the firmware or remap the double-tap gestures if you pair them with a smartphone from another manufacturer. They’re otherwise a great option if you own or plan to own a OnePlus device.

    OnePlus Buds

    Fast charging TWS earbuds

    Free yourself from wires with a pair of truly wireless earbuds from OnePlus.

The post OnePlus Buds are now available in Gray in the U.S. appeared first on xda-developers.



from xda-developers https://ift.tt/2Ggtusn
via IFTTT

The OnePlus 8T could have a flat display with a hole-punch cutout

It’s been a busy year for OnePlus. The company has already released 3 smartphones this year (the 8, 8 Pro, and Nord), its first-ever truly wireless earbuds (the OnePlus Buds), and plans on releasing possibly 2 more mid-range smartphones (code-named “clover” and “Billie“). As usual, though, OnePlus is gearing up to launch another flagship smartphone in the fall, and it’s expected to be the OnePlus 8T. Thanks to a teardown of the latest OxygenOS 11 Beta 4 release, we may have just caught our first glimpse at the upcoming phone, which is expected to be code-named “kebab.”

XDA Member and frequent OnePlus tipster Some_Random_Username did a teardown of OxygenOS 11 Beta 4 for the Oxygen Updater blog, and he found a few interesting tidbits that may pertain to the upcoming OnePlus 8T. First, a teardown of the new OnePlus Camera application suggests OnePlus is working on 8K video recording support, which currently isn’t available on any OnePlus device and is thus thought to be for the OnePlus 8T. We previously discovered evidence an upcoming OnePlus device may come equipped with a 64MP camera sensor, which can capture more than enough pixels to record at 8K resolution.

Here is the code mentioning 8K resolution support:

More importantly is a file found in the latest OnePlus Settings app called “oneplus_8t.webp.” This is an image file that is shown in the About Phone page in OxygenOS. Presumably, this render will be shown if the OS detects that the device is a OnePlus 8T, though we can’t confirm if this render is of the actual device or merely a placeholder.

OnePlus 8T render

From the render, we can see that the device has a flat display and a single hole-punch cutout in the top left. The OnePlus 8 and 8 Pro, in contrast, have curved displays, while the OnePlus Nord has a dual hole-punch cutout. We can’t really see anything else, though, including the back, but we can see the earpiece speaker, the volume buttons on the left, the power button on the right, and the Alert Slider on the right.

OnePlus typically releases its T-series of devices in the fall, which is right around the corner. With hints of a OnePlus 8T already trickling out, we’ll likely get more concrete details in the coming days and weeks.

The post The OnePlus 8T could have a flat display with a hole-punch cutout appeared first on xda-developers.



from xda-developers https://ift.tt/34Pxvy7
via IFTTT

OnePlus explains how they optimized OxygenOS 11 for better one-handed use

It won’t be long after Google rolls out the stable Android 11 release for Pixel phones that OnePlus rolls out the final version of OxygenOS 11 for its devices. Earlier this month, the company unveiled the latest version of its Android-based software and rolled out a beta for the OnePlus 8 series. Alongside a new beta release today, OnePlus took to its forums to explain how they came up with the new design language for OxygenOS 11.

In the post, OxygenOS Product Lead Gary C. explained how OnePlus analyzed data to design a system that’s more comfortable for one-handed use. The company says they conducted A/B testing and found that 65% of users prefer slightly smaller headlines while 80% of users prefer titles with subtitles rather than without. In accordance with these metrics, OnePlus designed a new “headline-body hierarchy that streamlines information delivery in OxygenOS 11.” Furthermore, the company looked at anthropometric data to determine the general regions of the screen where people can easily reach or struggle to reach, as shown below.

As a result, OxygenOS 11 moves touch controls closer to your thumbs for easier access. When you open a menu, settings will now be pushed to the lower half of the display. “We also wanted to add even more features to make one-handed use quicker and easier,” OnePlus said in a forum post. “So, for example, we added a new Quick Share button in the Camera app. Now you can long press the thumbnail of the last photo you took to quickly share the photo with just one motion.” The company also redesigned its Weather app based on these principles, with the new UI currently rolling out in beta.

OnePlus OxygenOS 11

 

The changes to OxygenOS 11 come in response to the current mobile landscape, which is flooded with devices that feature tall screens. While big displays are great for content consumption, they do present usability issues with people who have smaller hands.

Samsung made similar design changes in its One UI software, which made the company’s taller phones much easier to use by placing key interaction areas near the bottom of the screen. Even if OxygenOS 11 does take inspiration from Samsung, it’s still nice to see that better one-handed use is becoming more of a priority.

The post OnePlus explains how they optimized OxygenOS 11 for better one-handed use appeared first on xda-developers.



from xda-developers https://ift.tt/3beGSbR
via IFTTT

Samsung Galaxy Tab A7 2020 leaked renders show off Gold and Gray colors

The Android tablet market stands in no competition against Apple’s iPad lineup. But still, there’s ground to be covered at price points which Apple does not serve, and options to provide at the points where Apple continues to exist. Samsung’s premier tablets for this year are of course the Samsung Galaxy Tab S7 and Galaxy Tab S7 Plus, but there’s definitely room for many more tablets to be spread across the price spectrum. Samsung appears to be working on a new tablet, as leaked renders now show off the Samsung Galaxy Tab A7 2020 in its Gold and Gray colors.

These leaked renders come to us courtesy of Evan ‘evleaks’ Blass and his Patreon, and they show off the upcoming tablet from Samsung in two colors:

The render shows off a surprisingly basic looking tablet with a single rear camera and a front with decently-sized bezels. The Samsung branding can be seen on the back. Evan does not mention anything else, but the Samsung Galaxy Tab A7 (SM-T505) had earlier appeared in its 10.4″ avatar in a Google Play Console listing. From the listing, we know that the device will come with a 10.4″ display with a resolution of 1200 x 2000 pixels. The tablet will be powered by the Qualcomm Snapdragon 662 SoC, and at least one variant will have 3GB of RAM.

From the looks and preliminary specifications, one can expect the Galaxy Tab A7 2020 to be targeting some of the early segments of the market. We can expect Samsung to offer multiple storage variants and possible options for Wi-Fi-only and LTE models. It isn’t immediately clear if the tablet would officially support the new S Pen just like the Galaxy Tab S7 series. But even if it does, it is unlikely that an S Pen would be included in the box as the target pricing is expected to be humble. There is currently no information on the existence of a smaller sized variant.

The post Samsung Galaxy Tab A7 2020 leaked renders show off Gold and Gray colors appeared first on xda-developers.



from xda-developers https://ift.tt/3bdqbh5
via IFTTT

Google Maps now shows traffic lights on Android in the U.S.

Update 1 (08/31/2020 @ 12:11 PM ET): Google Maps is now showing traffic lights on Android for many people in the U.S. Scroll to the bottom for more information. The article as published on July 8, 2020, is preserved below.

Google Maps is undoubtedly one of the most popular apps in Google’s portfolio, and the company often releases updates to make the service even better. Since its 15th birthday earlier this year in February, the app has received a ton of new features like Live View AR navigation, integrated menu scanning, a new real-time location sharing UI, YouTube Music integration, and much more. Now, according to a recent report from Droid-Life, Google has started testing a new feature that will show traffic lights in Google Maps on Android.

Google Maps traffic lights

The report cites screenshots taken by a reader who lives in West Des Moines, Iowa, which show traffic lights in several intersections around the city. The traffic lights are visible both while using the traditional map view and while navigating, however, they do appear slightly bigger and more noticeable while navigating. The feature is expected to give users a heads up when they’re about to reach a traffic light and even help them plan their route ahead of time to avoid any unnecessary delay.

As of now, the feature is limited to just showing the traffic lights on the map and Google hasn’t included any additional functionality for users. However, that might change by the time the feature is released to more users. The feature currently appears to be in its early stages of development as it’s only available for a small number of users in certain regions on version 10.44.3 of the app. It’s also worth noting that Apple Maps has had a similar feature since last year which offers additional functionality like using Siri to alert users when they’re about to reach a traffic light.

Maps - Navigate & Explore (Free, Google Play) →


Update 1: Rolling Out Widely

Traffic light icons are now showing up for many people on Google Maps, at least in the United States (via AndroidPolice). You don’t need to turn the feature on manually nor do you need to activate traffic layers. The icons look the same when this feature was first spotted back in July, and they also automatically adapt to the map size. The icons appear when browsing the map or navigating.

The post Google Maps now shows traffic lights on Android in the U.S. appeared first on xda-developers.



from xda-developers https://ift.tt/2CivCh2
via IFTTT

Download: OnePlus 8 and OnePlus 8 Pro receive Android 11 Developer Preview 4-based OxygenOS 11 builds with September 2020 patches

OxygenOS 11, i.e. the upcoming iteration of OnePlus’ custom skin has already raised some eyebrows due to its revamped design language. The new UI was first unveiled through the third “Developer Preview” build of Android 11 for the OnePlus 8 series. Although DP3 was supposed to be the final Developer Preview build, OnePlus has now come up with yet another build based on Android 11 beta. Those running the DP3 build on their OnePlus 8/8 Pro are now receiving Developer Preview 4 as an incremental update.

OnePlus 8 XDA Forums || OnePlus 8 XDA Pro Forums

Apart from fixing numerous bugs, the latest DP build of OxygenOS 11 revamps the built-in Gaming Mode by introducing features like floating window and accidental touch prevention. Moreover, OnePlus has managed to ship September 2020 Android security patches through this update, albeit the changelog doesn’t mention anything about it.

oneplus_8_8_pro_oxygenos_11_android_11_dp4_ota

Thanks to XDA Senior Member jeffsga88 for the screenshot!

The complete changelog of this update is as follows:

  • System
    • Optimized display effects with some UI
    • Optimized the lagging issue under some settings
    • Optimized the stability with the upload of log in Community
    • Optimized delayed response issue with pull-down of the status bar
    • Fixed the crash/reboot issue under some settings
    • Fixed the all black issue with status bar in dark mode
    • Fixed the bug that system cannot be re-started after OTA upgrade
    • Fixed the disabled “save” feature of screenshot
  • Game space
    • Newly added gaming tools box for convenient switches of Fnatic mode, WeChat, QQ and Screen Recorder at one place (Enable it by swiping down from upper right/left corners of the screen in gaming mode)
    • Newly added mis-touch prevention feature. Enable it, swipe down from the top of the screen, click and the notification bar will pop out
  • Gallery
    • Fixed the abnormal increase of brightness when entering the Gallery
    • Fixed the incomplete screenshot issue in some cases
  • Shelf
    • Fixed the issue that background of weather did not display
  • Network
    • Improved the performance and stability of network transfers

Download: Android 11 Developer Preview 4 with OxygenOS 11 Design and Features for the OnePlus 8 and OnePlus 8 Pro

You can download the builds from the links below:

Download OxygenOS 11 (Android 11 Developer Preview 4): OnePlus 8 || OnePlus 8 Pro

After downloading the appropriate package for your phone, go to Settings > System > System Updates, and then click on the top-right icon and select “Local Upgrade” option. From there, select the update package that you have downloaded and proceed.

It is worth mentioning that you probably need a new set of downgrade packages to revert back to the stable release channel. The existing ZIPs (listed below) might not be sufficient due to their older compilation timestamps.

Downgrade package download links:


Thanks to XDA Senior Member Some_Random_Username for providing the download links!

The post Download: OnePlus 8 and OnePlus 8 Pro receive Android 11 Developer Preview 4-based OxygenOS 11 builds with September 2020 patches appeared first on xda-developers.



from xda-developers https://ift.tt/3lyLSge
via IFTTT

Qualcomm announces the Snapdragon 732G and confirms it’s coming to a POCO phone

The Qualcomm Snapdragon 730 and 730G were announced back in April 2019. Since then, the two SoCs have been featured in a number of key mid-range devices, including the Mi Note 10 Lite, POCO X2, Realme X2, Motorola One Fusion+, and the Google Pixel 4a. Most of these devices target the comfortable mid-range segment, or in some cases, the more premium mid-range offerings. Qualcomm is now refreshing the Snapdragon 730G SoC with a newer Snapdragon 732G SoC, promising even better performance.

The Qualcomm Snapdragon 732G brings two key improvements over the Snapdragon 730G: a Prime core with higher clock speed (2.3GHz versus 2.2GHz) and a 15% improvement in the Adreno 618 GPU. Everything else remains the same as the Snapdragon 730G, which itself was a smaller gaming-centric improvement over the Snapdragon 730. Consequently, the Snapdragon 732G features 1x Kryo 470 “Prime” core clocked at up to 2.3GHz, 1x Kryo 470 “Performance” core clocked at up to 2.2GHz, and 6x Kryo 470 “Efficiency” cores clocked at up to 1.8GHz. The microarchitecture of the Prime and Performance cores are based on ARM’s Cortex-A76 design while the microarchitecture of the 6 Efficiency cores is based on ARM’s Cortex-A55 design. The SoC is fabricated on Samsung’s 8nm LPP process.

The Qualcomm Snapdragon 732G also continues to feature several Snapdragon Elite Gaming features, just like the Snapdragon 730G. These features include Qualcomm Game Jank Reducer, Vulkan 1.1 Graphics Driver, True HDR, and anti-cheat extensions. There’s also the Spectra 350 Image Signal Processor with support for 4K HDR video capture, the 4th generation Qualcomm AI Engine with up to 3.6 TOPS, the Hexagon 688 DSP, Qualcomm Quick Charge 4+ support, the Snapdragon X15 LTE Modem with support for 3-CA and 4×4 MIMO on two carriers, support for the Qualcomm FastConnect 6200 subsystem, and support for Qualcomm’s Aqstic audio codec, among other features.

Qualcomm Snapdragon 732G Specifications & Features

Qualcomm AI Engine

  • Adreno 618 GPU
  • Kryo 470 CPU
  • Hexagon 688 Processor
  • Hexagon Vector eXtensions
  • Hexagon Tensor Accelerator
  • Hexagon Voice Assistant Accelerator
  • Qualcomm® Sensing Hub
  • Qualcomm® Neural Processing SDK

Modem

  • Snapdragon X15 LTE Modem
  • Support for 800 Mbps LTE
  • Downlink: LTE Cat 15 up to 800 Mbps, 3 x 20 MHz carrier aggregation, up to 256-QAM, up to 4 x 4 MIMO on two aggregated carriers
  • Uplink: LTE Cat 13 up to 150 Mbps, Qualcomm® Snapdragon™ Upload+ (2 x 20 MHz carrier aggregation, up to 64-QAM)
  • Dual SIM Dual VoLTE (DSDV)
  • Qualcomm® All Mode with support for all major cellular modes plus LAA. Support for:
    • VoLTE with SRVCC to 3G and 2G, HD and Ultra HD Voice (EVS), CSFB to 3G and 2G
    • Voice over Wi-Fi (VoWiFi) with LTE call continuity

Wi-Fi & Bluetooth

  • FastConnect 6200 Subsystem
    • Wi-Fi Standards: 802.11ax-ready, 802.11ac Wave 2, 802.11a/b/g, 802.11n
    • Wi-Fi Spectral Bands: 2.4 GHz, 5 GHz
    • Channel Utilization: 20/40/80 MHz
    • MIMO Configuration: 2×2 (2-stream) with MU-MIMO
    • 8-stream sounding (for 8×8 MU-MIMO)
    • Dual-band simultaneous (DBS)
    • Wi-Fi Security: WPA3-Enterprise, WPA3-Enhanced Open, WPA3 Easy Connect, WPA3-Personal
    • Target Wake Time (TWT)
  • Integrated Bluetooth
    • Bluetooth version: 5.1
    • Bluetooth audio: Qualcomm TrueWireless™ Technology, Qualcomm® aptX™ Adaptive audio

Camera

  • Qualcomm Spectra 350 Image Signal Processor
  • Hardware accelerator for computer vision (CV-ISP)
  • HEIF photo capture
  • Dual 14-bit ISPs
  • Dual camera: up to 22 MP, MFNR, ZSL, 30 fps
  • Single camera: up to 36 MP, MFNR, ZSL, 30 fps
  • Single camera: up to 48 MP, MFNR
  • Single camera: up to 192 MP
  • Video capture:
    • Standard: up to 4K HDR at 30 fps, 10-bit Rec. 2020 color gamut for HDR10 video
    • Slow motion: up to 1080p at 120 fps or 720p at 240 fps
  • Rec. 2020 color gamut video capture
  • Up to 10-bit color depth video capture
  • Multi-Frame Noise Reduction (MFNR)
  • Video Capture Formats: HDR10, HLG
  • 4K HDR Video Capture with Portrait Mode
  • Dual phase detection (2PD) sensors
  • Real-time object classification, segmentation and replacement

Audio

  • Low-power audio subsystem with AI
  • Qualcomm Voice Assistant Accelerator for advanced voice use cases
  • Always-on echo cancellation and noise suppression
  • Qualcomm Aqstic audio codec (up to WCD9341) and speaker amplifier (up to WSA8815)
  • Native DSD support, PCM up to 384 kHz/32-bit
  • Supports two wake words simultaneously
  • aptX Adaptive audio technology
  • Qualcomm TrueWireless Stereo Plus technology

Display

  • Maximum On-Device Display Support: QHD+ (3360 x 1440)
  • Maximum External Display Support: UHD (3840 x 2160)
  • Support for HDR displays
  • Qualcomm® Low Power Picture Enhancement
  • Qualcomm® True Palette Display Feature

CPU

  • Kryo 470, Octa-core CPU
  • Up to 2.3 GHz
  • 64-bit Architecture
  • 8nm Process Technology


Visual Subsystem

  • Adreno 618 GPU
  • Support for true HDR10 gaming
  • Vulkan® 1.1 API support
  • 4K HDR10 PQ and HLG Video Playback (10 bit color depth, Rec. 2020 color gamut)
  • H.264 (AVC), H.265 (HEVC) VP8 and VP9 playback
  • Physically Based Rendering
  • API Support: OpenGL® ES 3.2, OpenCL™ 2.0 FP, Vulkan 1.1, DirectX 12


RF Front-End

  • Qualcomm® Adaptive Antenna Tuning
  • Qualcomm® Envelope Tracking
  • Qualcomm® Signal Boost adaptive antenna tuning
  • High-power transmit (HPUE)


Security

  • Biometric Authentication: Fingerprint, Iris, Voice, Face
  • On-Device: Qualcomm® Mobile Security, Key Provisioning Security, Qualcomm® Processor Security, Qualcomm® Content Protection, Qualcomm® Trusted Execution Environment, Camera Security, Crypto Engine, Malware Protection, Secure Boot, Secure Token

General Specifications

  • Select Snapdragon Elite Gaming features
  • Memory Speed: up to 1866 MHz, 8 GB RAM
  • Memory type: 2 x 16-bit LPDDR4/4x
  • GPS, Glonass, BeiDou, Galileo, QZSS, and SBAS
  • Low Power Geofencing and Tracking, Sensor-assisted Navigation
  • Near Field Communications (NFC) support
  • DisplayPort over USB Type-C support
  • Quick Charge 4+ technology
  • Part number: SM7150-AC

Perhaps the most exciting news coming along with this announcement is the fact that the SoC will first be featured in an upcoming POCO smartphone.

Snapdragon 732G will deliver a powerful gaming experience, sophisticated on-device AI, and superior performance. We’re excited to work with POCO on the new POCO smartphone powered by the enhanced Snapdragon 732G globally.

Kedar Kondap, Vice President of Product Management, Qualcomm Technologies, Inc

We are extremely excited about the upcoming POCO smartphone and our collaboration with Qualcomm Technologies that allowed us to create the first device on the market with the latest Snapdragon 732G Mobile Platform. We believe the device will set a new benchmark in the mid-range category, completely redefining the relationship between a phone’s price and its capabilities.

Sam Jiang, Head of Products, POCO Global

Neither Qualcomm nor POCO explicitly confirm the device’s marketing name. But considering the fact that POCO has already started teasing and talking about the POCO X3 NFC, one needn’t even guess which phone would be the first with the Qualcomm Snapdragon 732G.

The post Qualcomm announces the Snapdragon 732G and confirms it’s coming to a POCO phone appeared first on xda-developers.



from xda-developers https://ift.tt/3gGTqtz
via IFTTT

The Motorola One 5G is coming to the U.S. on AT&T and Verizon for under-$500

Motorola burst back into the flagship scene earlier this year with the Qualcomm Snapdragon 865-powered, 5G-enabled Motorola Edge+. Alongside the Edge+, Motorola also unveiled the slightly cheaper Edge with the upper mid-range (but still 5G-enabled) Qualcomm Snapdragon 765G. And about a month ago, Motorola had announced an even more affordable 5G-enabled smartphone in the form of the Moto G 5G Plus. Now, Motorola is bringing over this smartphone to the USA in the form of the Motorola One 5G.

Motorola One 5G: Specifications

Specification Motorola Moto G 5G Plus / Motorola One 5G
Dimensions & Weight
  • 168 x 74 x 9 mm
  • 207g
Display
  • 6.7″ FHD+ LTPS LCD
  • 21:9 aspect ratio, 2520 x 1080
  • 90Hz refresh rate
  • HDR10
  • Dual hole-punch display
SoC  Qualcomm Snapdragon 765G:
  • 1x Kryo 475 (ARM Cortex-A76-based) Prime core @ 2.4GHz
  • 1x Kryo 475 (ARM Cortex-A76-based) Performance core @ 2.2GHz
  • 6x (ARM Cortex-A55-based) Efficiency cores @ 1.8GHz
  • 7nm EUV process

Adreno 620

RAM & Storage
  • 4GB + 64GB
  • 4GB + 128GB
  • 6GB + 128GB
Battery & Charging
  • 5000 mAh battery
  • 20W TurboPower charging
Fingerprint sensor Side-mounted fingerprint sensor
Rear Camera
  • Primary: 48MP, f/1.7
  • Secondary: 8MP, wide-angle, f/2.2
  • Tertiary: 5MP, macro, f/2.2
  • Quarternary: 2MP, depth, f/2.2
Front Camera
  • Primary: 16MP, wide-angle, f/2.0
  • Secondary: 8MP, f/2.2
Other Features
  • 3.5mm headphone jack
  • Wi-Fi 802.11 a/b/g/n/ac
  • Bluetooth 5.1
  • NFC
  • 5G: 1/3/7/8/28/38/41/77/78
Android Version Android 10

The Motorola One 5G is a rebranded Moto G 5G Plus, but we’re okay with the rebranding because that was a terrible name in the first place. One of the highlights of this device is its 21:9 aspect ratio display. Motorola mentions that 87% of its users preferred a 21:9 aspect ratio, so that is what it adopted on this smartphone. You do get a 90Hz refresh rate, though the panel is LCD — but since this phone is not aiming to be a flagship, this specification isn’t judged as harshly. The smartphone itself has a humble design made largely out of polycarbonate, so most of the 207g weight is coming from the beefy 5,000 mAh battery.

Moto G 5G Plus / Motorola One 5G XDA Forums

On the inside, you get a Qualcomm Snapdragon 765G, which should help keep things running smoothly despite not being an 8-series flagship SoC.

The Motorola One 5G comes with Android 10 out of the box. The OS is largely left unadulterated, but you get a few Motorola touches like the “chop to launch flashlight” feature and the Moto Power Touch feature that lets you reassign the double-power-button press. The power button also integrates the fingerprint sensor.

Motorola is only committing to one year of Android OS updates and two years of security updates at this moment.

Pricing and Availability

The Motorola One 5G will be a sub-$500 device in the USA and will be available through AT&T (sub-6GHz) and Verizon (with mmWave) in 4GB + 128GB configuration. Motorola has not shared the exact date of availability and pricing yet, and we also presume that the mmWave variant will cost some more. There will not be any unlocked versions of this phone in the USA. It remains to be seen how this phone stacks up against cheaper devices like the recent Google Pixel 4a.

The post The Motorola One 5G is coming to the U.S. on AT&T and Verizon for under-$500 appeared first on xda-developers.



from xda-developers https://ift.tt/3jxODMK
via IFTTT

Realme X2 Pro and X3/X3 SuperZoom get new Realme UI updates with August 2020 patches, Super Power Saving Mode, and more

Realme jumped into the league of affordable high-end phones by launching the Qualcomm Snapdragon 855 Plus-powered Realme X2 Pro (our review) back in 2019. The Chinese OEM reused the same SoC while designing this year’s Realme X3 series, which turned out to be an effective decision to keep the price low without sacrificing the raw horsepower. The Realme X2 Pro was launched with ColorOS 6.1 based on Android 9 Pie, while it received its Android 10/Realme UI update a few months ago and is scheduled to get an “Early Access” build of Android 11 in the coming days. The Realme X3/X3 SuperZoom, on the other hand, run on Android 10-based Realme UI out of the box. All of these three smartphones have recently received new Realme UI updates with tons of new software features and optimizations.

XDA Forums: Realme X2 Pro || Realme X3 || Realme X3 SuperZoom

The version number of Realme X2 Pro’s new OTA is RMX1931EX_11.C.31. FYI, both the Realme X3 and the Realme X3 SuperZoom share a common codebase, thus they have picked up a unified firmware with the build number RMX2081PU_11.A.41. There are a few notable changes in these updates: First, Realme has finally brought in the August 2020 Android security patches to these phones through the new builds of Realme UI. Next, the company has added support for auto-scrolling screenshot, “Multi-user feature”, and “Super Power Saving Mode” – the last two can be accessed from the Settings app. The experimental “Smooth Scrolling” feature has also made its way to the Realme X2 Pro through the new build.


Changelog

Expand the lists below to see the device-specific changelogs:

Changelog of software version RMX1931EX_11.C.31 for the Realme X2 Pro

  • Security
    • Android Security Patch: August, 2020
  • realme Lab
    • Added Smooth scrolling feature
    • Added Super nighttime standby feature
    • Added DC dimming feature
  • Camera
    • Added Camera Text scanner feature
  • Screenshot
    • Added auto scroll feature in scrolling screenshot
  • Settings
    • Added Super Power Saving Mode
    • Added default sound recording device option
    • Added Deep cleanup feature in Process Manager
    • Added return button in the screenshot preview interface
    • Added Multi-user feature
    • Added Quick guide feature in the battery setting interface
    • Added Quick guide feature in the security support interface
    • Added Quick guide feature in the other settings interface
    • Added long press to copy IMEI in the status information interface
    • Added automatic downloads option for app updates in the Wi-Fi interface
    • Optimized automatically hide option for floating ball in the full screen interface
    • Optimized status bar viewing, added second display option
  • Status Bar
    • Added OTG Switch toggle to notification panel
    • Optimized viewing for system update prompt pop-up window
    • Optimized “Mute-Bell-Vibrate” icon state
  • Flashlight
    • Added short press power button to turn off the flashlight while screen-off
  • System
    • Added long press to uninstall apps directly in the app drawer
    • Fixed font display issue for charging animation
    • Fixed crashing issue when opening hidden apps with access codes
    • Fixed the probabilistic connection issue when using Wi-Fi

Changelog of software version RMX2081PU_11.A.41 for the Realme X3/X3 SuperZoom

  • Security
    • Android Security Patch: August, 2020
  • realme Lab
    • Added the Super nighttime standby feature
  • Screenshot
    • Added auto scroll feature in scrolling screenshot
  • Settings
    • Added Super Power Saving Mode
    • Added Icon Pull-down gesture feature in launcher settings
    • Added return button in the screenshot preview interface
    • Added Multi-user feature
    • Added Quick guide feature in the battery setting interface
    • Added Quick guide feature in the security support interface
    • Added Quick guide feature in the other settings interface
    • Added automatic downloads option for app updates in the Wi-Fi interface
    • Optimized status bar viewing, added second display option
  • Status Bar
    • Added independent Switch toggles of focus mode
    • Optimized viewing for system update prompt pop-up window
    • Optimized “Mute-Bell-Vibrate” icon state
  • System
    • Fixed the probabilistic connection issue when using Wi-Fi
    • Fixed font display issue of charging animation
    • Fixed crashing issue when opening hidden apps with access codes

Download

Realme is known for its staged rollout model. The company prefers to push the updates randomly to a limited number of users and switch to a broader rollout a few days later to avoid the spread of showstopper bugs. Nevertheless, you can download the sideload-friendly full firmware package (in OZIP format) corresponding to the aforementioned builds from the index below and flash them right away.


Source: Realme Community (1, 2)

Thanks to XDA Recognized Developer yshalsager for providing these download links!

The post Realme X2 Pro and X3/X3 SuperZoom get new Realme UI updates with August 2020 patches, Super Power Saving Mode, and more appeared first on xda-developers.



from xda-developers https://ift.tt/32HgYJL
via IFTTT

Netflix is offering a few original shows and movies for free to everyone, without an account

The quest for dominance in the online video streaming industry is shared across different services, each of them battling for your free time and attention, and of course, your wallet. While platforms like YouTube primarily rely on user-submitted content that is broadcasted for free, other platforms like Netflix and Amazon Prime Video aim to be more of a cable-replacement, offering premium-quality content usually behind a subscription paywall. But not everyone can experience premium paywalled content all the time, which makes it a little difficult to entice potential subscribers to part with their money. One way is to offer lower payment threshold plans to lower the barrier of affordability, and Netflix is building up on it by now offering a few of its original shows and movies for everyone to watch for free, even without needing a Netflix account.

As spotted by OnlyTech, Netflix is now offering non-subscribers the ability to watch Netflix Original series and movies for free without needing to create a Netflix account. The list of content available could possibly vary across regions, but here are the titles available in India:

  • Series:
    • Stranger Things
    • Elite
    • Boss Baby – Back in Business
    • When They See Us
    • Love is Blind
    • Our Planet
    • Grace and Frankie
  • Movie:
    • Murder Mystery
    • Bird Box
    • The Two Popes

Watch for free on Netflix.com

All of these titles are available to play with a simple click on desktop and Android browsers. iOS browsers are not supported. Curiously, you can’t watch these for free on the official Netflix app on Android or on Android TV.

What’s the catch, you ask? The only catch that we could spot was the fact that only the first episode is available for watching for free for the listed series.

In a statement to NDTV Gadgets, Netflix offered the following statement:

We’re looking at different marketing promotions to attract new members and give them a great Netflix experience.

There is no indication that this marketing promotion is temporary, but it’s best to make hay while the sun still shines. These movies and shows might not be enough by themselves to convince users to opt for an annual subscription, but they might just be the kickstart needed to get some consumers onto the more basic and monthly subscription plans, just to find out what happens next in the series.

The post Netflix is offering a few original shows and movies for free to everyone, without an account appeared first on xda-developers.



from xda-developers https://ift.tt/34OPhkY
via IFTTT

Google Pay tests NFC-based contactless payments in India

Google will soon let Indian Google Pay users make contactless payments using their debit or credit card. Currently, Google Pay only offers Unified Payment Interface (UPI) payments that let users send or receive money directly to their bank accounts either by entering a mobile number or scanning a QR code. But that’s set to change as Google has begun testing tokenized card payments for a small batch of users in India.

As spotted by Android Police, some Google Pay users have started seeing the option to add a credit or debit card as a supported payment option in the Google Pay app. The option isn’t available for everyone as of now, but Google has slowly been expanding its A/B testing to more users over the last couple of weeks. The feature is most probably a server-side switch and doesn’t seem to require to be on the most recent version of the app. The option was unavailable for me on both my phones running the Google Pay version 65.0.001_RC06.

Google already has a support page up, which describes how users can set up their cards to use with Google Pay. Basically, users will have to fill in their card details (card number, expiry date, CVV, etc.) and authenticate it using the One Time Password.

Once activated and verified, users will be able to make tokenized card payments at NFC-enabled POS terminals, QR-based payments at vendors, and online payments on 3rd-party merchants where Google Pay is accepted. We first learned about Google’s plans to add support for tokenized cards in September last year. However, it’s only now that the company has finally begun to roll out the functionality to Google Pay users in India.

For now, Google only supports Axis debit/credit cards and SBI credit cards issued by Visa, but it’s likely it will bring support for more banks and issuers once the feature becomes available for all users.


Google Pay: Pay with your phone and send cash (Free, Google Play) →

Via: Android Police

The post Google Pay tests NFC-based contactless payments in India appeared first on xda-developers.



from xda-developers https://ift.tt/3hMEewg
via IFTTT

OxygenOS 10.5.6 for the OnePlus Nord improves Bluetooth connectivity and optimizes image stabilization

Another day, another round of software updates! This time OnePlus is back with a new build of OxygenOS for the OnePlus Nord. Tagged as OxygenOS 10.5.6, the latest update comes with a comparatively tiny changelog, but it does contain optimizations and fixes for the camera, system, and Bluetooth. However, there is no change in the Android security patch level (SPL) with this OTA.

OnePlus Nord XDA Forums

The previous update for the OnePlus Nord brought macro camera quality improvements. The OEM continues to push camera-related fixes, as the latest build specifically targets the domain of image stabilization performance. OnePlus also highlights a few improvements related to general power consumption and Bluetooth connectivity in the new firmware.

OnePlus Nord Review: Great Performance at a Great Price

The full changelog for the OxygenOS 10.5.6 update can be found below:

  • System
    • Improved system stability
  • Camera
    • Optimized image stabilization performance
  • Power
    • Improved general power consumption
  • Bluetooth
    • Improved Bluetooth connection stability
oneplus_nord_oxygenos_10.5.6

Thanks to OnePlus Community member Sagar366 for the screenshot!


Download OxygenOS 10.5.6 for the OnePlus Nord

As always, OnePlus is following a gradual rollout model. The company is rolling out the new update to a handful of users first. If no critical issue pops up during the initial phase, the rollout will be expanding to more devices over the coming days. In case you haven’t received the OTA update yet and you don’t want to wait for it, you can grab the appropriate update package for your model from the index below and freely sideload it right away. We have provided links to both incremental OTA and full OTA zips.


Thanks to XDA Senior Member Some_Random_Username for the download links!

The post OxygenOS 10.5.6 for the OnePlus Nord improves Bluetooth connectivity and optimizes image stabilization appeared first on xda-developers.



from xda-developers https://ift.tt/3hKBq2G
via IFTTT

Samsung starts mass producing its third-gen 16Gb LPDDR5 RAM modules

LPDDR5 RAM has now become the standard on flagships, and we are seeing new flagships in 2020 regularly reach the insane 16GB capacity. This jump up implies an increase in demand, and consequently, an increase in supply. Back in February 2020, Samsung had begun its first mass production line for the 16GB LPDDR5 mobile DRAM package utilizing the 1y process node (second-generation 10nm class process). Now, Samsung has begun mass production for the 1z process node for 16Gb LPDDR5 DRAM.

Samsung Electronics has been pushing the envelope for high-capacity RAM adoption. The company had announced the development of 8Gb (gigabit) LPDDR5 RAM in back in July 2018, following up with mass production of 12GB LPDDR5 mobile DRAM package in July 2019 and 16GB LPDDR5 mobile DRAM package in February 2020. This new announcement is for the second production line in Pyeongtaek, Korea, which has now commenced mass production of the industry’s first 16-gigabit (Gb) LPDDR5 DRAM using extreme ultraviolet (EUV) technology and built on Samsung’s third-generation 10nm-class (1z) process.

The 1z-based 16Gb LPDDR5 elevates the industry to a new threshold, overcoming a major developmental hurdle in DRAM scaling at advanced nodes. We will continue to expand our premium DRAM lineup and exceed customer demands, as we lead in growing the overall memory market.

Jung-bae Lee, Executive Vice President of DRAM Product & Technology, Samsung Electronics

Samsung’s Pyeongtaek Line 2 is the largest-scale semiconductor production line to date, spanning more than 128,900 square meters/1.3 million square feet, which is the equivalent of about 16 soccer fields. Samsung says that the new Pyeongtaek line will “serve as the key manufacturing hub for the industry’s most advanced semiconductor technologies, delivering cutting-edge DRAM followed by next-generation V-NAND and foundry solutions, while reinforcing the company’s leadership in the Industry 4.0 era“.

The new 16Gb LPDDR5 is the first memory based on currently most advanced 1z process node and which is being mass-produced using EUV tech, making it the highest speed and largest capacity available in mobile DRAM. The 1z process also makes this LPDDR5 package about 30% thinner than its predecessor (referring to the 12Gb LPDDR5 package), and about 16% faster. The 16Gb LPDDR5 can build a 16GB package with only eight chips, whereas the 1y-based 16GB LPDDR5 package required 12 chips (eight 12Gb chips and four 8Gb chips) to provide the same capacity.

Samsung is also planning to expand the use of its LPDDR5 offerings into automotive applications, offering an extended temperature range to meet strict safety and reliability standards in extreme environments.


Source: Samsung Newsroom

The post Samsung starts mass producing its third-gen 16Gb LPDDR5 RAM modules appeared first on xda-developers.



from xda-developers https://ift.tt/2YMQbdY
via IFTTT

dimanche 30 août 2020

[Update: Wider Rollout] Google is rolling out Nearby Share, its file-sharing AirDrop clone for Android 6.0+

Update 1 (08/31/2020 @ 01:20AM ET): Google Nearby Share is rolling out widely. Scroll to the bottom for more information. The article as published on August 4, 2020, is preserved below.

Last year, we learned that Google was preparing a new file-sharing service for Android. This file-sharing service was originally called “Fast Share” during early iterations, but Google eventually rebranded it to “Nearby Share” during the course of development. We got an early glimpse of the feature in January, and in late June, Google started testing the service with a handful of users on the latest Google Play Services beta release. Today, Google has announced that they are finally rolling out Nearby Share to millions of Android smartphones running Android 6.0 and above.

For those unaware, Android has never had a simple, fast, and unified way to share files between devices. Until Android 10, most Android devices did have access to Android Beam, a file-sharing service that required users to tap their phones together to initiate a handshake over NFC followed by a file transfer over Bluetooth or Wi-Fi Direct. Android Beam is, however, deprecated, clunkier, and slower than AirDrop, the file-sharing service on iOS that’s been around for years and is used by millions of iPhone and iPad users. AirDrop lets you quickly share files with any fellow iPhone or iPad users that are nearby. There are file-sharing services on Android that are arguably as simple and fast as AirDrop, but they all either require users to either download a third-party app or own a device from a specific smartphone manufacturer. Google is uniquely equipped to roll out a simple, fast, and unified file-sharing service thanks to its control over Google Play Services, which is installed on the vast majority of Android devices sold outside of China regardless of the manufacturer. That’s exactly what Nearby Share is—a simple, fast, and unified file-sharing service for Android.

With Nearby Share, Android users can quickly share files to nearby users with the tap of a button. After tapping the “share” button in an app, users can share file(s) by selecting the “Nearby Share” option. Nearby users will then get a notification that someone wants to share content with them. Users will always have the option to “accept” or “decline” the file, so files are never transferred without explicit confirmation. After tapping “accept”, the file(s) are transferred using the best available communication protocol: Bluetooth, Bluetooth Low Energy, WebRTC, or peer-to-peer WiFi. Thus, files can be shared even when the sender and recipient devices are both fully offline.

Google designed this feature with privacy in mind. You can send and receive files anonymously, for example. You can also choose which contacts (all, some, or none) are able to immediately see you when you turn on Nearby Share.

Nearby Share device visibility settings

Perhaps the best part of Nearby Share is that Google is making it cross-platform. While we don’t know about iOS compatibility, Google confirmed they’re working to expand the feature to additional platforms. The company confirmed that feature will work with Chromebooks in the coming months. In fact, it’s already available on Chrome OS if you enable a few feature flags. More general OS support, such as Windows, will be available via Google Chrome.

Nearby Share between Android and Chrome OS

Starting today, select Google Pixel and Samsung Galaxy smartphones running Android 6.0 or later will start getting Nearby Share. Since this feature is baked into Google Play Services, it’ll eventually become available for more Android smartphones. Check out this support page for more information on how the feature works.


Update: Google Nearby Share now rolling out widely

It appears that Google is rolling out Nearby Share more widely. We’ve spotted the feature on several devices now, like the ASUS ZenFone 7 Pro, OnePlus Nord, Nubia Red Magic 5S, and LG Velvet. All of these devices are running Google Play Services 20.30.19 stable. Other users with OnePlus, Xiaomi, Honor, Realme, and Nokia phones have also mentioned that they have received the feature.

To access Nearby Share, go to Settings > Google > Device Connections > Nearby Share, or Settings > Connected Devices > Connection Preferences > Nearby Share (this menu isn’t available on all OS versions and/or OEM skins). If this setting is visible to you, you can also edit your Quick Settings to add the Nearby Share tile.

As the screenshot indicates, number verification appears to be a newly added feature.

The post [Update: Wider Rollout] Google is rolling out Nearby Share, its file-sharing AirDrop clone for Android 6.0+ appeared first on xda-developers.



from xda-developers https://ift.tt/2EN0zv7
via IFTTT

T-Mobile OnePlus 7T, 7T Pro McLaren Edition can now be bootloader unlocked without waiting, 7T rebranding also possible

The bootloader unlocking experience on a T-Mobile-branded OnePlus smartphone is very much different from the unlocked variants. Once you pay off the contract and use the device on the network for at least 40 days, you’re eligible to perform a SIM unlock. After SIM unlocking, you need to generate a unique unlock token to be able to unlock the bootloader. Besides the added complexity of bootloader unlocking, the slower update frequency and the inability to participate in the OxygenOS Open Beta and Developer Preview programs are some of the main reasons why people prefer to “rebrand” their T-Mobile OnePlus phones to international (i.e. non-T-Mobile) firmware. If you have the T-Mobile OnePlus 7T and want to get rid of the carrier firmware, then you’ll be interested in learning that XDA Senior Member Superboy58 has managed to find a way to convert this variant to international without a traditionally unlocked bootloader/SIM unlock.

OnePlus 7T Forums

The trick is to patch the OPS file from the official unbrick package in such a way that the bootloader ignores the token generation part and allows users to unlock it with a standard Fastboot command. As soon as you unlock the bootloader, pick the Fastboot-flashable global firmware for the OnePlus 7T and do a clean flash to complete the rebranding process. Head over to the thread linked below for more instructions.

Rebrand T-Mobile OnePlus 7T to international firmware — XDA Thread

In case you have the T-Mobile OnePlus 7T Pro McLaren Edition, there’s a similar mod to unlock the bootloader without waiting. The only catch is, you can’t rebrand it like the other model. The T-Mobile variant is 5G capable, whereas an international variant of the OnePlus 7T Pro 5G simply does not exist. There is no way you can replace the stock T-Mobile McLaren Edition firmware with another official OxygenOS ROM. You can, however, opt for custom ROMs that are specifically built for this model.

Bootloader unlock T-Mobile OnePlus 7T Pro McLaren Edition without waiting

T-Mobile OnePlus 7T Pro McLaren Edition Forums

The post T-Mobile OnePlus 7T, 7T Pro McLaren Edition can now be bootloader unlocked without waiting, 7T rebranding also possible appeared first on xda-developers.



from xda-developers https://ift.tt/34LxLhz
via IFTTT

Google Pixel 5, Pixel 4a 5G, Samsung Galaxy S20 FE, Galaxy M51, and Nubia Red Magic 5S forums are open

It’s been a busy month for smartphone releases, and there are no signs of that slowing down. After opening up forums for the ZenFone 7, Moto G9, and two new Realme devices, we’re opening up the floodgates for more devices for people to chat about. Our forums for the Google Pixel 5, Google Pixel 4a 5G, Samsung Galaxy S20 FE, Samsung Galaxy M51, and Nubia Red Magic 5S are all open.

Google Pixel 5

Not long after Google teased the Pixel 5, some big leaks hit the web. In addition to a series of renders, nearly all of the specs of the Google Pixel 5 were revealed, including the battery size, RAM, and more. In other words, there’s not much we don’t know about the Pixel 5, except maybe the price. Google is expected to officially unveil the Pixel 5 towards the beginning of October.

Google Pixel 5 Forums

Google Pixel 5 leaked renders

Alleged Google Pixel 5 CAD render. Source: @OnLeaks/Pricebaba.

Google Pixel 4a 5G

In addition to the Google Pixel 5, Google is also gearing up to introduce the Pixel 4a 5G. The device is expected to be a step up from the Pixel 4a and includes support for 5G which, as you’d expect, will demand a higher price tag. Some of the device’s specs were already unveiled, and there’s even been a leaked picture, so there’s not much else to do but wait for Google to unveil it alongside the Google Pixel 5 in October.

Google Pixel 4a 5G Forums

Alleged Google Pixel 4a 5G CAD render. Source: @OnLeaks/91Mobiles

Samsung Galaxy 20 FE

Samsung has announced the new Galaxy Note 20 series, but the company isn’t done yet with the Galaxy S20 series. The company is allegedly prepping the Galaxy S20 “Fan Edition,” which is expected to feature a tweaked design and support 5G when it launches in the U.S. There are a number of other leaks and rumors about this device, which you can discuss freely in the forums.

Samsung Galaxy 20 FE Forums

Alleged Samsung Galaxy S20 FE press render. Source: Evan Blass

Samsung Galaxy M51

Big batteries have become commonplace in today’s smartphone market, but the Samsung Galaxy M51 will allegedly take it to the next level. Recent reports claim the device, which may include Qualcomm’s mid-range Snapdragon 730 chip, will feature a massive 7,000mAh battery, which should be plenty of juice to last through a day or two.

Samsung Galaxy M51 Forums

Alleged Samsung Galaxy M51 press render. Source: @Sudhanshu1414

Nubia Red Magic 5S

Looking to get your game on? Look no further than the Nubia Red Magic 5S. The gaming smartphone comes equipped with a Qualcomm Snapdragon 865 chip, 144Hz OLED display, and a triple-camera setup, rounding out what should be a pretty impressive flagship device. And it costs a respectable $579, making it an affordable yet powerful experience all around.

Nubia Red Magic 5S Forums


Are you looking forward to the Google Pixel 5, Google Pixel 4a 5G, Samsung Galaxy S20 FE, or Samsung Galaxy M51? Thinking of picking up the Nubia Red Magic 5S? Let us know your thoughts in the comments below!

The post Google Pixel 5, Pixel 4a 5G, Samsung Galaxy S20 FE, Galaxy M51, and Nubia Red Magic 5S forums are open appeared first on xda-developers.



from xda-developers https://ift.tt/3lv8dLy
via IFTTT